Assistive device help individuals with limited mobility move from one location to another, and to prevent slips and falls The non-slip pads on the underside of the transfer board are designed to stabilize the board against surfaces during transfers Ideal for bed, car, wheelchair, and toileting transfers, the curved board supports up to 336 lbs weight capacity and is safe for use during MRIs Reinforced plastic construction resists chipping, shattering, and splintering and can easily be wiped clean to control the spread of infections Dimensions of the curved transfer board are 27 ⅝” L x 14 ⅝” W, tapered to 10 ⅛” at the middle
Curve shaped glide board used in many transfer situations between wheelchair, bed, bathing chair, car, etc. The smooth synthetic material allows easy sliding into position, either with or without assistance, when the client has enough strength in arms and body and good balance to perform the transfer. 8.5 x 30”. Capacity 300 lb.
Etac E-Boards are suitable for sitting transfer between bed, wheelchair, toilet, toilet chair, car seat or many other seating situations. The transfer board is placed to bridge and level out the small gap between the seating positions.
The smooth top surface makes it easy and comfortable to slide across, while antislip stripes in the bottom surface prevents the board from sliding out of position.
Etac E-Boards are available in two different models and four different sizes, two longer boards with side flaps and two shorter boards.
The shorter boards (ERP9558-01 and ERP9558-02) are more suitable to support self-propelled transfer. These are light and compact and easy to bring along in the wheelchair, back-pack, etc. The shorter boards comes in one-piece, without flaps.
The longer boards (ERP9558-03 and ERP9558-04) with flaps are particularly suitable for transfer with care giver assistance. The flexible flaps on the long sides, bent up in the back and down in the front, facilitates placing the board in front of the wheels of the wheelchair and provides protection from the same whilst the front flap makes it more comfortable on the edge.
Made of strong polyethylene material. The smooth top allows easy sliding transfer, while the non-slip surface on the underside prevents the board from sliding out of position. Capacity 300 lb.
Etac E-Boards are suitable for sitting transfer between bed, wheelchair, toilet, toilet chair, car seat or many other seating situations. The transfer board is placed to bridge and level out the small gap between the seating positions. The smooth top surface makes it easy and comfortable to slide across, while antislip stripes in the bottom surface prevents the board from sliding out of position. Etac E-Boards are available in two different models and four different sizes, two longer boards with side flaps and two shorter boards. The shorter boards (ERP9558-01 and ERP9558-02) are more suitable to support self-propelled transfer. These are light and compact and easy to bring along in the wheelchair, back-pack, etc. The shorter boards comes in one-piece, without flaps. The longer boards (ERP9558-03 and ERP9558-04) with flaps are particularly suitable for transfer with care giver assistance. The flexible flaps on the long sides, bent up in the back and down in the front, facilitates placing the board in front of the wheels of the wheelchair and provides protection from the same whilst the front flap makes it more comfortable on the edge. Made of strong polyethylene material. The smooth top allows easy sliding transfer, while the non-slip surface on the underside prevents the board from sliding out of position. Capacity 300 lb.
Etac E-Boards are suitable for sitting transfer between bed, wheelchair, toilet, toilet chair, car seat or many other seating situations. The transfer board is placed to bridge and level out the small gap between the seating positions. The smooth top surface makes it easy and comfortable to slide across, while antislip stripes in the bottom surface prevents the board from sliding out of position. Etac E-Boards are available in two different models and four different sizes, two longer boards with side flaps and two shorter boards. The shorter boards (ERP9558-01 and ERP9558-02) are more suitable to support self-propelled transfer. These are light and compact and easy to bring along in the wheelchair, back-pack, etc. The shorter boards comes in one-piece, without flap. The longer boards (ERP9558-03 and ERP9558-04) with flap are particularly suitable for transfer with care giver assistance. The flexible flap on the long side, bent up in the back and down in the front, facilitates placing the board in front of the wheels of the wheelchair and provides protection from the same whilst the front flap makes it more comfortable on the edge. Made of strong polyethylene material. The smooth top allows easy sliding transfer, while the non-slip surface on the underside prevents the board from sliding out of position. Capacity 300 lb.
Made of strong polyethylene material with flexible side flap. The smooth top allows easy sliding transfer, while the non-slip surface on the underside prevents the board from sliding out of position. Capacity 300 lb.
Designed with cutouts for positioning against the wheel of the wheelchair. The non-slip areas on the underside prevent the board from sliding out of position. The smooth surface allows easy sliding transfer. The Butterfly board can also be used with an optional glide wing, which is attached to the board by velcro straps, and which provides a further low-friction surface between the person and the board. Capacity 550 lb. Size 13 x 26”
Etac Dolphin is a sturdy and stable transfer board uniquely designed for transfer to the toilet. The board has cut outs for positioning against the wheel of the wheelchair and non-slip pads on the underside, which allows good positioning and avoids sliding out of place. The cut out allows the user to remain on the board while on the toilet. 69 cm long.
Easy patient transfer from a wheelchair to a car seat, commode, bed or bath
PP8231
$96.95
The 30'' (76 cm) transfer board features sturdy 3/4" (19mm) maple wood construction with 3/8" (3.2mm) tapered ends for easy sliding and safe transfer. Manual transfer can be possibly dangerous to both the patient and the caregiver. This transfer board makes it easier and diminishes injuries that could occur.
Product Benefits
Durable hard wood construction
Easy to store when not in use
Tapered edges help slide patients on and off easier
Aids in safe patient transfers with diminished injury risk
Useful for helping patients with lower extremity disabilities
Easy to clean
Specifications
Length: 30" (76 cm)
Width: 8" (20 cm)
Thickness: 3/8" (3.2mm) to 3/4" (19mm) in the center
Wood The ends of this solid maple transfer board are tapered to 1/8” for easy sliding. The slots at each end provide an easy grip. 8” wide and 3/4” thick.
Bariatric Transfer Board - (500lb) 9.5 in/25 cm Wide
Constructed of 3/4" thick baltic birch plywood for extra weight bearing capacity. The ends are tapered and the complete board is coated in a smooth clear and durable finish. 29" long. The 9.5" wide board has a capacity of 500 lb.
This Bariatric Transfer Board is 12 inches wide. Constructed of 3/4" thick baltic birch plywood for extra weight bearing capacity. The ends are tapered and the complete board is coated in a smooth clear and durable finish. 29" long. Capacity: 700 lb.
This lightweight 7-ply 3/8" thick birch board is clear sealed. With the armrest removed the contoured shape fits around the wheel on the wheelchair for ease when transferring. Place the triangular cutout against the wheel to help hold the board in place.
Made of durable plastic. Measures 9” wide and 3/8” thick. Deluxe board has hand holes and notches, that allow transfers from either side. Capacity 400 lb.