VForce Vibration Therapy Device The vibration therapy is a new treatment that has proven effective in: • Muscle strengthening • Enhancing range-of-motion • Increasing flexibility • Relieving pain • Relaxing muscle spasms • Improving balance and proprioception
Benefits of Vibration: research shows that vibration therapy is indicated for a broad range of therapeutic applications: • Balance and Fall Prevention • Bone and Joint Rehab • Neuromuscular Re-Education • Knee Rehab • General Health and Wellness • Low Back Pain • Flexibility and Range of Motion
As a therapy, whole-body vibration (WBV) was explored by Russian scientist, Vladimir Nazarov who tested vibration on astronauts in an effort to decrease the loss of muscle and bone mass in space. Astronauts in space lose their muscular strength very quickly and the decrease of bone density increases the risk of bone fractures. Before their departure, astronauts were subjected to WBV training sessions so that the density of their bones would increase and their muscular strength would rise Vibration Therapy is becoming increasingly popular. Initially, vibration training was mainly used in the fitness industry, but Vibration Therapy is expanding quickly into all areas of physical medicine and rehabilitation. Science Behind Vibration Whole body vibration is a neuromuscular training method which uses a vibration stimulus to incite an involuntary response in muscles. Mechanoreceptors (muscle spindles and Golgi Tendon Organs – GTO) are the sensory organs of the muscle which are sensitive to mechanical stimulation. Muscle spindles send information to the brain regarding the tension of the muscle, causing the muscle to contract when excited. Conversely, when the GTO (located where the tendon and muscle meet) is excited, it causes the muscle to relax. When stimulated by vibration, the muscles spindles, tendons and GTO send impulses to the brain and cause the muscles to contract and relax at the rate of vibration, a phenomenon called Tonic Vibration Reflex (TVR). This response recruits nearly 100% of the muscle fibers in contraction and enhances neuromuscular efficiency. Skeletal muscles contract and release at the same frequency of the vibration, for example if standing in a squat position on the vibration platform set at 30 Hz, muscles will contract and release 900 times in a 30-second session.- impossible to simulate during a normal exercise regime. Vibration Parameters To achieve optimal results with Vibration Therapy, two variables must be considered. 1. Amplitude – While all vibration devices produce vibration in three different directions – front and back (x), sideways (y), and up and down (z), the most safe and effective platforms produce sufficient vertical vibration while limiting vibration in the horizontal plane. Research has shown that significant vertical amplitude (2-6 mm) is required to generate adequate “loading” on both the muscular and skeletal systems. Conversely, vibration in the horizontal plane may cause significant side effects after prolonged use. 2. Frequency - Frequency (Hz) is equally important. Research shows that the body responds positively to vibration in the 25-50 Hz range. The acceleration forces resulting from vibration cause the muscles to contract. Due to this involuntary contraction of the muscles, many more muscle fibers are recruited than in a voluntary movement (Issurin & Tenenbaum 1999). This is confirmed by heightened EMG activity (Bosco et al. 1999, Delecluse et al. 2003). This rapid contraction and relaxation of muscles at 25 to 50 times per second works as a pump on both the circulatory and lymphatic systems, increasing the speed of blood flow and lymphatic drainage throughout the body (Kerschan-Schindl et al. 2001; Lohman et al. 2007). Why Dual Motors? Research has shown that significant vertical amplitude (2-6 mm) is required to generate adequate “loading” of both the muscular and skeletal systems. Only synchronized dual motors, as featured in Vforce, are capable of generating adequate vertical amplitude while limiting the ineffective horizontal vibrations generated by single-motor units.
Easily adaptable to be used in a wide variety of applications. The back support can be adjusted to 10.5” in height and can be angled from 0 to 90 degrees. This bench is excellent for use with pulley systems. Comes complete with wheel set and a second seat. Length 40”, height 18-40”, width 13”.
Talia Prone Board The board can be used at a desk or table and folds flat for storage. To fit child 19 to 27” heel to armpit height. Prone board table is designed to fit the Talia prone board to provide a play/work surface at an ideal position for the child. The table fits directly to the prone board and is adjustable so that a level surface can be provided at the different prone board angles between prone and standing.
Prone Board Table The board can be used at a desk or table and folds flat for storage. To fit child 19 to 27” heel to armpit height. Prone board table is designed to fit the Talia prone board to provide a play/work surface at an ideal position for the child. The table fits directly to the prone board and is adjustable so that a level surface can be provided at the different prone board angles between prone and standing.
Fully adjustable standing tables. The padded knee support and buttocks support are adjustable in height. Also, the unit offers three body thickness adjustments and two body width adjustments at the hips. Velcro ankle straps are mounted on the adjustable foot alignment rail. The table top adjusts to various depths.
Size of child standing table: .Cut out 6.5 x 20” .Top and base 24 x 24” .Top height from floor 26 to 43”.
Multiple place table provides each child with a large recreational/work area. Foot platforms are rubber covered for safety. Scratch resistant laminate top. Top: 30 x 48"; cutout: 7 x 10"; box: 14 x 14 x 32”; height from floor 32¾”; foot platform adjusts 1½” to 11½”.
AliStrap is gentle on skin. It has no adhesive, unlike tape. The exclusive SoftEdge™ design acts like a soft padded edge. AliStrap is the answer to all your positioning, taping and strapping needs.
The cut-to-length strap for any application: surgical, imaging, you name it! AliStrap can be used in a number of practical situations, including strapping patients safely and securely for any procedure, tying together and organizing cords, keeping bulky dressings in place, and much more.
Always use in combination with a low friction cover
ERP9560-01
$295.00
Specially designed for horizontal transfer. Immedia 2Move transfer board is used to bridge the gap and even out the height difference between two horizontal surfaces. It is used for horizontal transfer between beds, bed to shower trolley, bed to x-ray table, stretcher to bed, etc. It is simple to transport and store.
INTENDED USE
• Bridges the gap when transferring between two supine positions
• Transfer between beds
• Transfer between bed and shower trolley
• Transfer between bed and stretcher, x-ray table, operating table
Using the 2 Move transfer board, friction is minimized and strain on the personnel is reduced. Can be folded for storage. Size: 19.5 x 71”. Capacity 330 lb.
2Move sliding board for lying transfer
Manual transfer between beds is a difficult and heavy task. Size, weight and the patients capabilities affects the possibility for manual transfer. Also, the lying position means several pressure and friction points which further limits the possibility for a secure transfer. It is furthermore difficult for the care giver to get close enough to reach and to get into an ergonomic position. The gap between the beds and differences in height affects the possibility for a smooth and safe transfer for both the care giver and the patient.
Etac 2Move Transfer Board creates a bridge over the gap and supports levelling out height difference between the transfer positions, whether bed to bed, bed to operating table, x-ray table, etc.
2Move board is used together with a supplementing low-friction cover, that slides around the board, and allows the board to follow along under the patient and facilitates transfer. 2Move transfer board ensures a gentle, smooth and secure transfer all the way, for both the patient and the care giver.
Always use in combination with a low friction cover. Please see related items tab.
The cover increases sliding function as well as external protection and hygiene control.
Etac 2Move Transfer Board is used together with a low-friction cover that slides around the board to minimize friction under the patient and facilitate the transfer. The cover ensures that the board moves along under the patient ensuring a comfortable, smooth and secure transfer all the way.
The cover is replaceable and easy to clean, either by washing or wipe off with disinfectant.
The cover, besides minimizing frition, also provides an additional protection for tear and wear of the board, bacterial control and facilitates maintenance.
Height adjustable table ideal for work modification situations. Frame is 36 in. wide to allow for wheelchair accessibility. Keyboard table top measures 12 in. wide and tilts to 31°. A convenient 16 x 12 in. side section can be attached to the right or left of the keyboard table. Monitor table measures 16 x 36 in. and can slide forward an additional 8 in. A 16 x 16 in. side section can be attached to the right or left. Height adjustable 23-34 in.
Height adjustable computer table with tabletop surfaced with non-reflecting beech laminate. Features a 35.5 x 43.5” tabletop with a 15.75” (dia.) cut-out in the front. The monitor tray (15.75 x 21”) may be lowered stepwise by 3” and tilted positively or negatively.
Thanks to its shape and colours, BIRILLO is accepted as a "toy" by the child and this predisposes to a serene use, without fear, by stimulating its curiosity of exploring the surrounding enviroment. For this reason BIRILLO plays a very important part in the development of the perceptive and motor visual functions of the child, which are necessary to know and represent the space.
The triangular sitting position prevents from the extreme hip and trunk extention and lets the child have his head and trunk well lined up. According to this, the aid helps the child having a right posture and his moving impulse. The abduction block keeps the pelvis in the triangular sitting. Its posture stimulates the movement of the arms and the rotation of the trunk.
Seat depth: 20 cm (7.8") Seat width: 26 cm (10.2") Total width: 65 cm (25.6") Total lenght: 51 cm (20") Backrest height: 19 cm (7.5") Total height min/max: 40-56 cm (15.7-22") Distance seat-base: 22-30 cm (8.6-11.8") Turning width: 73 cm (28.7") Weight: 10 Kg (22 Lbs.) Maximum Load: 40 Kg (88 Lbs.)
Thanks to its shape and colours, BIRILLO is accepted as a "toy" by the child and this predisposes to a serene use, without fear, by stimulating its curiosity of exploring the surrounding enviroment. For this reason BIRILLO plays a very important part in the development of the perceptive and motor visual functions of the child, which are necessary to know and represent the space.
The triangular sitting position prevents from the extreme hip and trunk extention and lets the child have his head and trunk well lined up. According to this, the aid helps the child having a right posture and his moving impulse. The abduction block keeps the pelvis in the triangular sitting. Its posture stimulates the movement of the arms and the rotation of the trunk.
Seat depth: 23 cm (9") Seat width: 30 cm (11.8") Total width: 73 cm (30") Total lenght: 59 cm (23.2") Backrest height: 21 cm (8.2") Total height min/max: 42-62 cm (16.5-24.4") Distance seat-base: 22-34 cm (8.6-13.3") Turning width: 81 cm (31.8") Weight: 11 Kg (24.2 Lbs.) Maximum Load: 50 Kg (110 Lbs.)
Simple to use. All models fit any institutional, school or home toilet. Orthopedic molded Hi-impact ABS backs, with coated and chromed steel bases. Backs lift off from the base when not in use. Small support includes reducer ring.
Waterproof, soft cushions add comfort to the supports. They attach securely with Velcro and are easy to clean. Reduce inside width of supports by 1”. Will fit all sizes of Wrap-Around Bath Supports, Toilet Supports and Positioning Commodes.
Waterproof, soft cushions add comfort to the supports. They attach securely with Velcro and are easy to clean. Reduce inside width of supports by 1”. Will fit all sizes of Wrap-Around Bath Supports, Toilet Supports and Positioning Commodes.
Waterproof, soft cushions add comfort to the supports. They attach securely with Velcro and are easy to clean. Reduce inside width of supports by 1”. Will fit all sizes of Wrap-Around Bath Supports, Toilet Supports and Positioning Commodes.
Padded Cushion For Toilet Support - Hi-Back - Medium
PP4559-05
$199.00
Padded Cushion For Toilet Support - Hi-Back - Medium Waterproof, soft cushions add comfort to the supports. They attach securely with Velcro and are easy to clean. Reduce inside width of supports by 1”. Will fit all sizes of Wrap-Around Bath Supports, Toilet Supports and Positioning Commodes.
Frame with fixed elements painted with non-toxic powder paint and chromed adjustable elements
Pelvic and thoracic straps made of polyester fabric with velcro belts for the adjustment in circumference
Removable work table, made of plastic-laminated wood, adjustable in height and depth
Knee pads, adjustable in height, width and backward-forwards
Heel rests, adjustable in width and depth
Ergonomic hand wheels, for the adjustment of elements with pointed fixing screws
Slightly flexible wooden base. Thanks to the flexibility, the child is stimulated to assume and maintain an upright position by working all his/her muscles and reducing a hypotonic attitude.
DIMENSIONS:
Support circumference: 70 cm (27.5")
Support width: 30 cm (11.8")
Distance knee pads-footboard: 20-47 cm (7.8-18.5")
Footboard width: 65 cm (25.6")
Footboard length: 75 cm (29.5")
Distance table-footboard: 70-100 cm (27.5"-39.3")
Distance chest support-footboard: 85-110 cm (33.4"-43.3")
Distance pelvic support-footboard: 65-85 cm (25.6"-33.4")