Ergonomic and easy to use acu-point or trigger point locator and stimulator. Push button stimulation feature for instant treatment of the point right after detection. Pulse frequency is fixed at 10 Hz. Includes 2 probe tips, hand grounding pole with attached wire, 9 volt battery, carrying case and instructions.
The new AS SUPER4 combines the highest quality electronics, latest technical innovation, easy-to-use operating elements, and reliable safety standards.
This unit lets you adjust the intensity in 0.1mA increments, allowing you to find the exact level needed for each patient. Record exact intensity settings in your patients' file, so you can pick up precisely where you left off at your next appointment.
The electro-acupuncture unit includes, in addition to the standard pre-set programs, 7 free programs in order to give the acupuncturist a larger application field. The multiple selections of frequencies, pulse widths, and therapy duration offer new options of treatment.
Features: - 30 fixed programs (including HAN) - 7 free programs - 4 channels - up to 8 needles - Digital - Sound ON/OFF - Interlocking keypad function - AKS for skin protection - Intensity turns OFF if circuit is not closed for better safety - Display indicates battery level - Ability to pause stimulation - Intensity settings in 0.1mA steps - Battery operation or mains supply
The ES-130 (formerly IC-1107) is a 3 channel, safe, reliable and easy to use unit. Ideal for busy clinics that require multiple units. Low/high intensity settings. Frequency range from 1-500 Hz. Suitable for needles. Unique wave pulse minimizes excessive charge build up in the tissue. With its fresh new look, the ES-130 is a compact, lightweight, sturdy, palmsize, high quality Japanese electro-therapy device. Featuring a High/Low switch on the back of the unit, the switch is toggled to Low to facilitate use with needles or to High for MEA electro-therapy. It offers three independently controlled output channels with adjustable frequency indicated by a flashing light.
The waveform is a unique biphasic pulse which has been designed to minimize electrolysis damage to the needle. The pocket portable ES-130 is the smallest and smartest looking professional electro-therapy unit in the world, for use in or out of the office. This unit is not equipped with a point locator.
Accessories included: .3 X Lead Wire with alligator clips .1 X 9V Battery .1 X Carrying Case
Specifications:
. Independent intensity channels . Frequency: L - 1 to 20 Hz M - 20 to 150 Hz H - 150 to 500 Hz . Low volts & current: 0 to 18 volts, 0 to 36 milliamps +-15% (500 ohm load) . Hi volts & current 0 to 30 volts, 0 to 60 milliamps+-15% (500 ohm load) . Voltage max: 30 volts (500 ohm load) . Pulse width: 100 microseconds (µS) . Pulse shape: asymmetric biphasic square wave . Pulse mode: continuous . Power source: one 9 volt battery . Freq indicator: flashing red light . Size, wt, color: 4.5" x 3.2" x 1.2", 0.3 lbs, grey
Note: When using 9-volt Duracell Batteries with the ES-130, a thin shim (or paper) must be placed at the bottom of the battery to make proper contact (ie, Duracell are shorter in length). Also, in order to use the built-in battery check (located on the backside of the unit), power must be turned on.
Identical to ERP2233-01 but the unit has passed a special electrical inspection by QPS(Laboratory equivalent to CSA). A requirement of some institutions.
The ES-130 (formerly IC-1107) is a 3 channel, safe, reliable and easy to use unit. Ideal for busy clinics that require multiple units. Low/high intensity settings. Frequency range from 1-500 Hz. Suitable for needles. Unique wave pulse minimizes excessive charge build up in the tissue. With its fresh new look, the ES-130 is a compact, lightweight, sturdy, palmsize, high quality Japanese electro-therapy device. Featuring a High/Low switch on the back of the unit, the switch is toggled to Low to facilitate use with needles or to High for MEA electro-therapy. It offers three independently controlled output channels with adjustable frequency indicated by a flashing light.
The waveform is a unique biphasic pulse which has been designed to minimize electrolysis damage to the needle. The pocket portable ES-130 is the smallest and smartest looking professional electro-therapy unit in the world, for use in or out of the office. This unit is not equipped with a point locator.
Accessories included: .3 X Lead Wire with alligator clips .1 X 9V Battery .1 X Carrying Case
Specifications:
. Independent intensity channels . Frequency: L - 1 to 20 Hz M - 20 to 150 Hz H - 150 to 500 Hz . Low volts & current: 0 to 18 volts, 0 to 36 milliamps +-15% (500 ohm load) . Hi volts & current 0 to 30 volts, 0 to 60 milliamps+-15% (500 ohm load) . Voltage max: 30 volts (500 ohm load) . Pulse width: 100 microseconds (µS) . Pulse shape: asymmetric biphasic square wave . Pulse mode: continuous . Power source: one 9 volt battery . Freq indicator: flashing red light . Size, wt, color: 4.5" x 3.2" x 1.2", 0.3 lbs, grey
Note: When using 9-volt Duracell Batteries with the ES-130, a thin shim (or paper) must be placed at the bottom of the battery to make proper contact (ie, Duracell are shorter in length). Also, in order to use the built-in battery check (located on the backside of the unit), power must be turned on.
Identical to ERP2233-01 but the unit has passed a special electrical inspection by QPS(Laboratory equivalent to CSA). A requirement of some institutions.
The Cefar TENS/NMES is a 2 channel stimulator used by patients at home and therapists in clinics to provide electrical stimulation treatments in pain management (TENS) and neuro muscular stimulation (EMS/NMES).
Features
Mains rechargeable Lithium Polymer battery: Plug your device directly to the mains plug to charge the battery. Fast and complete charge in less than 90 minutes with a battery life of 6 to 10 hours treatment depending on parameters used.
1+1 Function: The Cefar TENS stimulator features 2 independent channels that can be managed separately. Users can select either the same program on both channels, or 2 different programs that can be used simultaneously. This allows treatment of two different body parts, or two patients simultaneously, or combines NMES and TENS as one treatment.
Compliance: Keep track of patients' home treatments by monitoring how many hours of usage since the device was reset, along with total device usage.
Painscore: Record patients' pain score in the stimulator before and after treatment, with a numeric scale (1-10)
Locking function: Lock the program to be sure your patient will only use the appropriate program.
Rotatable belt clip: Turn the belt clip to have the cable outputs on the bottom or on the top depending on the body area to stimulate.
Program mode: Create up to 5 custom programs and select your own parameters.
Acupuncture mode: Select the electro acupuncture mode for clinical use only.
Specifications
Outputs: Two independent and individually adjustable channels that are electrically isolated from each other.
Pulse shape: Constant asymmetric rectangular current with pulse compensation for TENS programs to eliminate any direct current component to prevent residual polarisation at skin level. Symmetric for P10 NMES Program.
Maximum pulse intensity: 99.5 mA in Constant Current mode or 99 V in Constant Voltage mode for neurostimulation. 30 mA for electroacupuncture.
Pulse intensity increments: Manual adjustment of stimulation intensity from 0 to 99 mA in minimum increments of 0.5 mA for Constant Current Mode, 0 to 99 V in 1 V increments for Constant Voltage mode for electrostimualtion (5V for first setp). 0,1 mA – 30mA steps 0,1 mA for electroacupuncture.
Pulse width: 60 to 400 μs.
Frequency: 1-120 Hz
Maximum electrical charge per pulse: 80 micro coulombs (2 × 40 μC, compensated)